| For taping
tops and bottoms of uniform size boxes in wet Environments.
The BB-2/S
(bottom belt) case sealer is a new addition of low
cost, high-performance case taping machinery. Small
in size and highly versatile, these machines are
built of 10 guage stainless steel.
With a
single drive motor and aggressive drive belts, this
workhorse will stand up to your toughest challenges.
It is equiped with NEMA 4 approved motor and electronics
to operate in washdown conditions.
- Plug in operation, 11OV/4.6A or 220V/2.3A
- Fast & easy box size change
- Adjustable leg extensions
- Perfect for ink-jet printers where coding is required
at the bottom of boxes
- Instantly interchangeable and removable tape cartridges
- Applies 2" wide pressure-sensitive
tape up to 15" diameter rolls.
- Belt Speed 60'/minute
- Speed up to 30cs/Minute depending on
box size and operator skill
- Conveyor height adjustable from 22-1/4"
to 29-1/4"
- Power Requirements: 110V/ 4.6A/ 60Hz
(no air required)
| BOX SPECIFICATIONS: |
Length |
Width |
Depth |
| Min.
box size: |
| Max.
box size: |
| (Note:
High Mast available for tall boxes) |
|
